Tektelic KONA 16 Macro
Prerequisite
Enable Root Access
Log into the box with the username "admin"
Run this command to enable root access (BSP 5.1.x+)
sudo opkg remove disable-root-login
Once this package is removed you can log into the box with the username "root" and the default Tektelic password
Remove the following opkg's
opkg remove kona-pkt-forwarder
opkg remove tektelic-mqtt-bridge
Reboot the system
In order for the mqtt-bridge process to be properly terminated you will need to reboot the system.
tektelic_reset
| Supported Senet Packet Forwarder Versions |
|---|
| 02_22_XX - Release Notes |
| 02_20_XX - Release Notes |
Netmoregroup Packet Forwarder for Developers
Registration
If you have not done so already you will need to register your gateway through your Developer or RAN Provider account.
Note
The serial number for this device is the 8 digit Product Type (starting with a "T") an underscore "_" followed by the 9 digit serial number which can be found on bottom of the Gateway.
Installation
For information on connecting an this platform to the Netmoregroup Network please contact customer support at support@senetco.com.
Registration
If you have not done so already you will need to register your gateway through your Developer or RAN Provider account.
Note
The serial number for this device is the 8 digit Product Type (starting with a "T") an underscore "_" followed by the 9 digit serial number which can be found on bottom of the Gateway.
Installation
Copy and paste the following command into the Tektelic KONA 16 Macro root SSH console .
For information on connecting this platform to the Netmoregroup Network please contact customer support at support@senetco.com.
reboot
Once registration and Gateway software installation are complete the Gateway will be displayed in the Netmoregroup Portal Dashboard with the current registration status (this may require a refresh of the browser).